Monday, April 2nd
**First day of the 4th Quarter....only 43 days of school remaining**
1st Hour B Day
1. Sketching Technique Notes....teacher lead
2. Update your "Table of Contents"
-it is on the front white board
3. Drawing "One-Point" perspective shapes
-Drawing Shapes in 1 Point Perspective (Create these in your engineering notebook)
4. Drawing a "One-Point" perspective room
-Sketching a room in 1 Point Perspective (create in your engineering notebook)
2nd and 3rd Hour STEM
**PLEASE COMPLETE THE LEARNER SURVEY TODAY**
1. Vocabulary 2.1....this is due this Wednesday
-please complete a Quizlet for this vocab terms
2. 2.1 vocabulary quiz is this Thursday
3. Playground re-designs are due this Wednesday
-each group is required to have a printed picture below your displayed model
4. I would like to have all projects judged by this Friday
Tuesday, April 3rd
1st Hour A Day
1. Dimensioning Quizlet is due today....show me it if you are done
2. Sketching practice....1 point shapes and 1 point rooms
-Drawing Shapes in 1 Point Perspective (Create these in your engineering notebook)
-Sketching a room in 1 Point Perspective (create in your engineering notebook)
3. Two Point Perspective Drawings....watch and sketch out in your
engineering notebook
-Two Point Perspective Shapes and Landscapes
2nd and 3rd Hour STEM
**PLEASE HAVE OUT YOUR ASSIGNED TOOL BOX @ YOUR ASSIGNED SEAT**
1. Vex Building Techniques.....practice lesson #1
-once you are finished, please have me check it off
2. Worktime.....Playground Re-designs
3. Quizlets are due this Thursday
4. Vocabulary quiz is also this Thursday
Wednesday, April 4th
1st Hour B Day
NO CLASS TODAY....2 HOUR LATE START
2nd and 3rd Hour STEM
Class starts @ 10:00 am....then proceed to your normal schedule
Thursday, April 5th
1st Hour A Day
**QUIZLET GRADE GOES IN TODAY.....QUIZ WILL BE MONDAY**
1. Quick Review.....1 point perspective vs. 2 point perspective
2. Everyone should have their 1 point sketches completed
3. Now, everyone needs to complete their 2 point sketches
-watch this tutorial and complete the shapes and landscape sketches
-Two Point Perspective Shapes and Landscapes
4. Monday, you will be turning in your engineering notebooks to be graded
2nd and 3rd Hour STEM
1. VEX Build #2....Should finish by the end of class on Monday
2. Please finish up with your re-design....I want the printed
copy by tomorrow
3. Quizlets are also due tomorrow
4. Please review your flashcards.....Quiz is tomorrow
-quiz will have definitions and pictures
Friday, April 6th
1st Hour B Day
1. Dimensioning Quizlet is due Tuesday....show me it if you are done
2. Sketching practice....1 point shapes and 1 point rooms
-Drawing Shapes in 1 Point Perspective (Create these in your engineering notebook)
-Sketching a room in 1 Point Perspective (create in your engineering notebook)
3. Two Point Perspective Drawings....watch and sketch out in your
engineering notebook
-Two Point Perspective Shapes and Landscapes
2nd and 3rd Hour STEM
Workday....please complete in the following order:
1. Quiz - 2.1 Automation Key Terms
-secret word is on the front board
2. Show me your finished quizlet
3. Print out your re-design for the playground
4. Complete VEX build #2.....1st, 2nd, 3rd class levers
Monday, April 9th
1st Hour A Day
1. Please make sure you are checking your grade on Skyward
-remember I take all missing work
2. I am grading Engineering Notebooks today....please check with the front board
-if you are not finished with your 1 and 2 point drawings, please get
them finished and turned in for me to grade
3. Notes: Orthographic (2D) views.....please pick-up 1.4.4
-teacher lead discussion
4. Complete page #3 on your own
2nd and 3rd Hour STEM
Workday.....VEX Build #2
-I must initial each part of VEX build #2
Tuesday, April 10th
1st Hour B Day
1. Please make sure you are checking your grade on Skyward
-remember I take all missing work
2. I am grading Engineering Notebooks today....please check with the front board
-if you are not finished with your 1 and 2 point drawings, please get
them finished and turned in for me to grade
3. Notes: Orthographic (2D) views.....please pick-up 1.4.4
-teacher lead discussion
4. Complete page #3 on your own
2nd and 3rd Hour STEM
NO 3RD HOUR CLASS TODAY....STATE TESTING
1. 2.2 Vocabulary....complete as a Quizlet
2. Complete Lever builds 1,2,and 3
Wednesday, April 11th
1st Hour A Day
**EARLY RELEASE SCHEDULE TODAY - 12:45**
1. Please complete the following items for Notebook Check #1:
-Sketching Techniques....packet of notes that we took during class
-1 point shape sketches
-1 point room sketch
-2 point shape sketches
-2 point city sketch
-Sketching practice....packe of notes that we took during class
2. Complete you Isometric to Orthographic practice problems
3. Please study your "Dimensioning Quizlet Terms"...quiz is next Tuesday
2nd and 3rd Hour STEM
**EARLY RELEASE SCHEDULE TODAY - 12:45**
3rd period....Today is Financial Literacy day
-please log onto www.teachbanzai.com
-from here use the following code in order to create your personal account:
HJFPC3
Thursday, April 12th
1st Hour B Day
1. Please complete the following items for Notebook Check #1:
-Sketching Techniques....packet of notes that we took during class
-1 point shape sketches
-1 point room sketch
-2 point shape sketches
-2 point city sketch
-Sketching practice....packet of notes that we took during class
**THIS GRADE IS GOING INTO SKYWARD TODAY**
2. Complete you Isometric to Orthographic practice problems
-answer key....Orthographic Isometric Matching Key
3. Drawing Orthographics from Isometrics.....watch this video tutorial
-Creating Orthographic Views (You will need 2D graphing paper)
-Orthographic Problem #2
2nd and 3rd Hour STEM
1. Complete level build 1, 2, and 3.....I must initial each
-this is a 15 point grade
2. Work on your Quizlet
3. If you finish early, please try assembling one of your
lever builds on Inventor
-VEX Inventors can be found in my "k" drive
-Read folder, Automation/Robotics, VEX Parts for Inventor folder
Friday, April 13th
1st Hour A Day
1. Please check your current grade on Skyward....many of you are still
missing your Notebook check....you need the following items:
-Sketching Techniques....packet of notes that we took during class
-1 point shape sketches
-1 point room sketch
-2 point shape sketches
-2 point city sketch
-Sketching practice....packet of notes that we took during class
2. Complete your Isometric to Orthographic matching practice problems
THIS WAS THE 1.4.4 HANDOUT THAT YOU GOT ON WEDNESDAY
-if you need an extra one, please see the sub
-colored pencils can be found on the back tool cart
-once you are done, please check your answers with the answer key
-answer key....Orthographic Isometric Matching Key
3. Drawing Orthographics from Isometrics.....watch these "2" video tutorials
and pickup two piece of graphing paper off the table by the pencil sharper
-TRY THIS DRAWING FIRSTCreating Orthographic Views (You will need 2D graphing paper)
-NOW, TRY THIS DRAWING ON A NEW SHEET OF GRAPHING PAPEROrthographic Problem #2
2nd and 3rd Hour STEM
1. Work on completing your Quizlet....2.2 Terms....I will check them on Monday
2. NO WORKTIME TODAY ON YOUR LEVER BUILDS
3. Now, open up Inventor
-I would like you to try "assembling" a vex build in Inventor
-go to my "K" drive (the flashdrives should also have all this material on them)
-go to read....then go to Automation/Robotics
-then go to the "Vex Parts for Inventor".....here you should find "5" folders
-open up the structure folder and you should see all the structure parts
-take the remaining today and try to assemble a vex build and save
Monday, April 16th
1st Hour B Day
NO CLASS....2 HOUR LATE START
2nd and 3rd Hour STEM
NO CLASS....2 HOUR LATE START
Tuesday, April 17th
1st Hour A Day
1. Have you checked your grade on Skyward?
-please show me your engineering notebook so that I can give you credit
2. Have we finished the orthographic drawings?
3. Please following this agenda for today:
-complete both "orthographic" practice drawings found below (I must check them off)
-Orthographic practice #1Creating Orthographic Views (You will need 2D graphing paper)
-Orthographic practice #2Orthographic Problem #2
4. If you finish early, please come see me
2nd and 3rd Hour STEM
1. Quizlets are due tomorrow
2. 2.2 Vocabulary quiz is this Friday
3. All "3" lever builds must be done today....I will not be here at recess today
4. If you finish early, please try an assembly on Inventor using the Vex parts
Wednesday, April 18th
1st Hour B Day
1. Have you checked your grade on Skyward?
-please show me your engineering notebook so that I can give you credit
2. Have we finished the orthographic drawings?
3. Please following this agenda for today:
-complete both "orthographic" practice drawings found below (I must check them off)
-Orthographic practice #1Creating Orthographic Views (You will need 2D graphing paper)
-Orthographic practice #2Orthographic Problem #2
4. If you finish early, please come see me
2nd and 3rd Hour STEM
1. I will need to check your 2.2 Quizlet today
2. 2.2 Vocabulary quiz is this Friday
3. VEX Mechanisms - Teacher Lead Notes....cut and place into your notebook
-please be sure to update your "Table of Contents"
4. Simple Mechanism Handout
-You need to keep this handout, for I will need to initial each build
-go thru the powerpoint in order to correctly match up each of the "12"
-Observing the "12" Mechanisms in Action
Thursday, April 19th
1st Hour A Day
NO CLASSES.....SNOW DAY
2nd and 3rd Hour STEM
NO CLASSES.....SNOW DAY
Friday, April 20th
1st Hour B Day
1. Make sure you have all "3" handouts and a bag of shapes
-shapes can be found on the back counter
2. Making Isometric shapes from orthographics
-5 practice problems
3. Try to work sketch out the isometric shape as you wait
-read thru the PLTW notes to help
4. Isometric practice....complete the tutorial on a piece of iso paper
-please be sure to update your "Table of Contents"....on the front white board
Isometric from orthographic view (please re-create on a piece of iso paper)
2nd and 3rd Hour STEM
1. Quick review.....mechanisms
2. We have until next Friday to complete the "12" builds
-remember....I must approve your builds
Monday, April 23rd
1st Hour A Day
1. Make sure you have all "3" handouts and a bag of shapes
-shapes can be found on the back counter
2. Making Isometric shapes from orthographics
-5 practice problems
3. Try to work sketch out the isometric shape as you wait
-read thru the PLTW notes to help
4. Isometric practice....complete the tutorial on a piece of iso paper
-please be sure to update your "Table of Contents"....on the front white board
Isometric from orthographic view (please re-create on a piece of iso paper)
2nd and 3rd Hour STEM
1. Please make sure the "Motion" zip lock bag parts are emptied
2. 2.2 Vocabulary test is this Wednesday
3. "12" mechanism builds
Tuesday, April 24th
1st Hour B Day
1. Please update your "Table of Contents"
-can be found on the front white board
2. Isometric Practice #2....please watch this tutorial & complete the Isometric sketch
Isometric from orthographic view (please re-create on a piece of iso paper)
2. Isometric Practice #3....please watch this tutorial and BE SURE TO TAKE NOTES
-Creating Isometrics from Orthographic Views (Please complete the worksheet questions)
3. EXTRA CREDIT - Try drawing this isometrically
2nd and 3rd Hour STEM
Worktime - Mechanism builds
Wednesday, April 25th
**EARLY RELEASE SCHEDULE - 12:45 DISMISSAL**
1st Hour A Day
1. Please update your "Table of Contents"
-can be found on the front white board
2. Isometric Practice #2....please watch this tutorial & complete the Isometric sketch
Isometric from orthographic view (please re-create on a piece of iso paper)
2. Isometric Practice #3....please watch this tutorial and BE SURE TO TAKE NOTES
-Creating Isometrics from Orthographic Views (Please complete the worksheet questions)
3. EXTRA CREDIT - Try drawing this isometrically
2nd and 3rd Hour STEM
1. Worktime.....mechanisms
2. 2.2 Vocabulary quiz is tomorrow
Thursday, April 26th
1st Hour B Day
1. Please update your "Table of Contents"
-can be found on the front white board
2. Isometric Practice #2....please watch this tutorial & complete the Isometric sketch
Isometric from orthographic view (please re-create on a piece of iso paper)
2. Isometric Practice #3....please watch this tutorial and BE SURE TO TAKE NOTES
-Creating Isometrics from Orthographic Views (Please complete the worksheet questions)
3. EXTRA CREDIT - Try drawing this isometrically
2nd and 3rd Hour STEM
1. 2.2 vocabulary quiz....15 pts.
2. Worktime....mechanisms
Friday, April 27th
1st Hour A Day
1. Please update your "Table of Contents"
-can be found on the front white board
2. Isometric Practice #2....please watch this tutorial & complete the Isometric sketch
Isometric from orthographic view (please re-create on a piece of iso paper)
2. Isometric Practice #3....please watch this tutorial and BE SURE TO TAKE NOTES
-Creating Isometrics from Orthographic Views (Please complete the worksheet questions)
3. EXTRA CREDIT - Try drawing this isometrically
2nd and 3rd Hour STEM
Worktime.....can we finish today with the mechanisms?
Monday, April 30th
1st Hour B Day
1. Everyone needs to complete the following items during class today:
-tutorial #2 and #3
-the "3" last practice isometric sketches
2. Drawing Test is this Wednesday....please look over the following:
-one point
-two point
-orthographics
-isometrics
2nd and 3rd Hour STEM
1. We need to finish all the mechanisms today
2. IF YOU FINISH EARLY PLEASE ORGANIZE YOUR CLEAR TOOL BOX
-PLEASE PLACE EXTRA PIECES BACK ONTO THE ROBOTICS CART
2. Survival Challenge.....we will start tomorrow
Tuesday, May 1st
1st Hour A Day
1. Everyone needs to complete the following items during class today:
-tutorial #2 and #3.....THIS IS A 20 POINT GRADE....WHICH I WILL INPUT TODAY
-the "4" last practice isometric sketches
2. Drawing Test is this Wednesday....please look over the following:
-one point
-two point
-orthographics
-isometrics
2nd and 3rd Hour STEM
1. Please have me check your "Mechanisms" check list today
2. Survival Challenge.....no partners
-discuss as a class
-you need to complete the "Design Brief"
-you may now begin building
Wednesday, May 2nd
1st Hour B Day
1. Drawing Test....20 points
2. Inventor Tutorial #1....please watch and complete the
worksheet questions
-Inventor Tutorial #1 - This goes with the 1.5.2 packet
2nd and 3rd Hour STEM
GRADES ARE UPDATED....SOME OF YOU DID NOT TURN IN YOUR MECHANISM SHEET
YOU MUST COMPLETE YOUR LEVEL SET TODAY!!!!
ALL CLEAR TOOL BOXES MUST BE ORGANIZED BY THIS FRIDAY
1. There should be no mechanisms left still assembled in the backroom
2. Please have your thumbnail sketches ready for me to approve
3. Build time....Survival Challenge
-this machine must cut wood, grind grain into flour, and pump water
Thursday, May 3rd
1st Hour A Day
1. Drawing Test....20 points
2. Inventor Tutorial #1....please watch and complete the
worksheet questions
-Inventor Tutorial #1 - This goes with the 1.5.2 packet
2nd and 3rd Hour STEM
1. Survival Challenge should be completed Tomorrow!!!!
-once you are finished please bring over in order to have the motor run it
2. RobotC.....this is how things will look
Friday, May 4th
1st Hour B Day
1. Test results
2. Inventor Tutorial #1....please watch and complete the
worksheet questions
-Inventor Tutorial #1 - This goes with the 1.5.2 packet
3. Inventor Tutorial #2....please watch and add answers to your packet
-you should be completing any of the builds that I am demonstrating
-Tutorial #2
2nd and 3rd Hour STEM
Survival Challenge.....should be completed by the end of the hour today
Monday, May 7th
1st Hour A Day
1. Test results
2. Inventor Tutorial #1....please watch and complete the
worksheet questions
-Inventor Tutorial #1 - This goes with the 1.5.2 packet
3. Inventor Tutorial #2....please watch and add answers to your packet
-you should be completing any of the builds that I am demonstrating
-Tutorial #2
2nd and 3rd Hour STEM
1. Please make sure I grade your "Survival Machine"
-please have me score the rubric
2. Finally, make sure your have disassembled your machine
3. Make sure your "clear toolbox" is organized....like the illustration taped in
4. Now, go thru the "Vex Electronics" tutorial
**All tutorials are found in my "k" drive...Automation/Robotics....Vex Programming
-you will need all the electrical components in your black tool box
-you will also need a cortex, a charged battery, and a USB cable
Tuesday, May 8th
1st Hour B Day
1. If you would like to take the re-take test, please make arrangements
to come in during your ASP today
2. Inventor 1.5.2...quick discussion
3. Geometric Constraints....more practice with Inventor
2nd and 3rd Hour STEM
1. Please have me assess your "Survival Challenge" mechanism today
2. Make sure your "clear toolbox" is organized....like the illustration taped in
3. Now, go thru the "Vex Electronics" tutorial #1 first than proceed on
**All tutorials are found in my "k" drive...Automation/Robotics....Vex Programming
-you will need all the electrical components in your black tool box
-you will also need a cortex, a charged battery, and a USB cable
Wednesday, May 9th
1st Hour A Day
**EARLY RELEASE SCHEDULE TODAY.....12:45**
**CLASS SCHEDULE IS ON THE FRONT WHITE BOARD**
1. If you would like to take the re-take test, please make arrangements
to come in during your ASP today
2. Inventor 1.5.2...quick discussion
3. Geometric Constraints....more practice with Inventor
2nd and 3rd Hour STEM
1. Now, go thru the "Vex Electronics" tutorial #1 first than proceed on
**All tutorials are found in my "k" drive...Automation/Robotics....Vex Programming
-you will need all the electrical components in your black tool box
-you will also need a cortex, a charged battery, and a USB cable
Thursday, May 10th
1st Hour B Day
1. Go thru the "Geometric Constraints"....students must finish the drawings
-pick up an answer key when you are ready
2. Creating the Sketch Cube.....on your own.....YOU CAN DO IT
3. Skimmer Build....watch the tutorials and new some new skills
2nd and 3rd Hour STEM
1. Now, go thru the "Vex Electronics" tutorial #1 first than proceed on
**All tutorials are found in my "k" drive...Automation/Robotics....Vex Programming
-you will need all the electrical components in your black tool box
-you will also need a cortex, a charged battery, and a USB cable
2. You should be able to get a motor running today!!!
Friday, May 11th
1st Hour A Day
1. Go thru the "Geometric Constraints"....students must finish the drawings
-pick up an answer key when you are ready
2. Creating the Sketch Cube.....on your own.....YOU CAN DO IT
3. Skimmer Build....watch the tutorials and new some new skills
2nd and 3rd Hour STEM
1. Now, go thru the "Vex Electronics" tutorial #1 first than proceed on
**All tutorials are found in my "k" drive...Automation/Robotics....Vex Programming
-you will need all the electrical components in your black tool box
-you will also need a cortex, a charged battery, and a USB cable
2. You should be able to get a motor running today!!!
3. Now, pick-up the "Race Car" project
Step #1: Watch the video entitled "Gears - Speed and Torque Ratios"
-you need to take some notes and pay special attention to the arrangement of gears
Step #2: Research some possible designs on Google
-type in VEX race car project and select images
-now, sketch out a thumbnail sketch of car and annotate all the necessary parts
Monday, May 14th
1st Hour B Day
1. Once you finish your "Geometric Constraints" show me
2. Now, begin working on the sketch cube
-there is a video lesson tutorial found in my "k" drive
3. Now, begin working on the "bracket" project
2nd and 3rd Hour STEM
1. Many of you still have not shown me your running motor
2. Vex "Dragster" project....please complete in this order
-Complete the "Gears" worksheet....it goes along with the video lesson
-read thru the criteria
-complete some research....look up VEX race car project
-complete the design brief
-EVERYONE MUST HAVE THEIR SKETCHES DONE FOR TOMORROW
Tuesday, May 15th
1st Hour A Day
1. Once you finish your "Geometric Constraints" show me
2. Now, begin working on the sketch cube
-there is a video lesson tutorial found in my "k" drive
3. Now, begin working on the "bracket" project
2nd and 3rd Hour STEM
1. Remember....many of you have not showed me your motor running program
-please make arrangements during ASP, recess, and or lunch to do so
2. Vex Race Car Project
-what are the criteria???
-you may work with a partner or alone
3. Please have the following completed in this order:
-Design Brief should be completed....PLEASE SHOW ME
-Should have an initial sketch with annotations completed....PLEASE SHOW ME
-you may now begin building
-you may also begin writing your RobotC program....PLEASE BE SURE TO SAVE!!!!
Wednesday, May 16th
1st Hour B Day
**GRADES HAVE BEEN UPDATED ON SKYWARD...PLEASE CHECK TODAY**
1. Both of the following grades have been applied to Skyward:
-Geometric constraints and Sketch cube
2. Bracket Build is next....there is a tutorial found in the "k" drive
2nd and 3rd Hour STEM
Worktime.....Race Car Project
-race track is set-up on the hallway
Thursday, May 17th
1st Hour A Day
**GRADES HAVE BEEN UPDATED ON SKYWARD...PLEASE CHECK TODAY**
1. Both of the following grades have been applied to Skyward:
-Geometric constraints and Sketch cube
2. Bracket Build is next....there is a tutorial found in the "k" drive
2nd and 3rd Hour STEM
1. Race Cars should be completed today!!!
2. All time trials should be recorded and submitted to me
Friday, May 18th
1st Hour B Day
1. Please check your grade on Skyward....make sure I did not make a mistake
-Geometric Constraints and Sketch Cube should now be done
2. Everyone should be on the Bracket build today
-video tutorial is in my "k" drive
2nd and 3rd Hour STEM
1. Race time!!!!
-please turn in your trials....I will match you up
Monday, May 21st
1st Hour A Day
1. Please check your current grade on Skyward
2. Please be sure to finish the bracket build
3. Now, you may work on one of the following items:
-Skimmer build.....tutorials can be found in my "k" drive
-Pegboard toy....tutorials can be found in my "k" drive
2nd and 3rd Hour STEM
1. Race time
2. Claw bot build
Tuesday, May 22nd
1st Hour B Day
1. Please check your current grade on Skyward
2. Please be sure to finish the bracket build
3. Now, you may work on one of the following items:
-Skimmer build.....tutorials can be found in my "k" drive
-Pegboard toy....tutorials can be found in my "k" drive
2nd and 3rd Hour STEM
1. Please make sure I have graded your Race Car
-rubrics can be found on the back table
2. Now, modify your car for torque.....how much weight can you pull?
Wednesday, May 23rd
1st Hour A Day
Kalahari Band fieldtrip
2nd and 3rd Hour STEM
Kalahari Band fieldtrip
Thursday, May 24th
1st Hour B Day
You may start working on your projects
2nd and 3rd Hour STEM
1. Please check your grade on Skyward....many of your are missing the racer project
2. We need to start with the VEX clean-up mission
3. All toolboxes need to be organized and cleaned out
-team effort
Friday, May 25th
1st Hour A Day
You may start working on your projects
2nd and 3rd Hour STEM
1. Please check your grade on Skyward....many of your are missing the racer project
2. Thank you.....the VEX toolboxes look great
3. Clawbots.....if you want to help, we can use these on Tuesday
for some competitions
Monday, May 28th
NO CLASSES.....MEMORIAL DAY
Tuesday, May 29th
1st Hour B Day
Wednesday, May 30th
1st Hour A Day
Thursday, May 31st
LAST DAY OF SCHOOL....ENJOY YOUR SUMMER AND BE SAFE!!!
|
|
|
|
| Last updated 2025/09/12 15:05:55 CDT | Hits 264 |
|
|
