| A | B |
|---|
| glue joint | never use stock that is cracked or has a poor ______ ______ because it could break and hit you. |
| side | always stand to the ____ of the stock when turning on the late because it could jump off and hit you when starting |
| after you have mounted rough stock on the late, rotate stock by hand to make sure it wont hit anything. | aad |
| ad | do not wrap sandpaper or cloth around fingers because it could catch and hurt your fingers |
| 1 inch | ____ is the smallest diametere stock cut on lathe |
| ac | never adjust thew tool rest or use calipers while the lathe is turning it could get caught and break something |
| bb | the tool rest should be 1/8 away from the stock |
| aab | you should gradually increase or decrease the speed of the stock so that the wood will not be broken in half |
| aabb | if the stock is larger than 2 you mus cut off the corners |
| aabbb | the tool used first for rough turning is the gouge |
| aabbbb | the larger the diameter of the stock the lower the speed |
| aadd | the tool rest shoud be below dead center |
