| A | B |
|---|
| Hand Wheel | To manually lift and lower needle |
| Spool Pin | To hold the thread on top of the machine |
| Take up Lever | Pulls tbread from spool and regulates stitches |
| Tension Disk | Control tightness of thread |
| Thread guides | Holds thread in place for the importance parts |
| Stitch Length | Regulates length of stitch |
| Presser Foot Lifter | Raises and lowers foot to hold fabric |
| Feed Dog | Moves material through machine |
| Needle | Sew the fabric |
| Bobbin | Hold the lower thread |
| Bobbin case | Holds the bobbin |
| Reverse Stitch | Sew stitches backward |
| Bobbin Winder | Puts thread on the bobbin |
| Throatplate | Used as guide for sewing straight |
| Bobbin Winder Stopper | Stops bobbin when full |
| Bobbin Winder Spindle | Holds bobbin for filling |
| Spool Pin | Holds spool of thread |
| Pattern Selector | Choose different types of stitches |
| Bobbin Winder Thread Guide | Controls thread release when filling bobbin |
| Thread Take Up Lever | Takes thread up and down to sew |
| Presser Bar | Connects to machine foot |
| Presser Foot Thumb Screw | To hold foot tight |
| Power Switch | Turns machine and light off and on |
| Needle Plate | To sew at different widths from edge |
| Needle Clamp | To loosen or tighten needle when replacing |
| Cover or Slide Plate | covers bobbin area |
| Bobbin Winder Clutch | Loosen to wind bobbin |
