| A | B |
|---|
| 62.5/125 multi-mode cable | Fiber optic cable |
| According to TIA/EIA-568-A, the maximum distance for cable runs in horizontal cabling | 90 meters |
| The TIA/EIA-568-A standard specified media for use in LAN | CAT 3, CAT 4, and CAT 5 |
| that patch cords or cross-connect jumpers located at the horizontal cross-connect cannot exceed | 6 meters |
| patch cords that are used to connect equipment at the work area cannot exceed | 3 meters |
| a recognized type of networking media in TIA/EIA-568-A, it is not recommended for new installations | coaxial cable |
| For unshielded-twisted pair, the TIA/EIA standard calls for four pair ______ | 100 ohm cable |
| TIA/EIA-568A requires a minimum of ______ telecommunications outlets or connectors at each work area | 2 |
| The TIA/EIA standards address six elements of the LAN cabling process | horizontal cabling, telecommunications closets, backbone cabling, equipment rooms, work areas, entrance facilities |
| Horizontal cabling includes the networking media that is used in the area that extends from the _____ to a ______ | wiring closet , workstation |
| For shielded twisted-pair cable, the TIA/EIA-568-A standard calls for two pair _____ | 150 ohm cable |
| most frequently recommended and implemented TIA/EIA standards cable used in installations today | Cat 5 |
| The total length of the patch cords and cross-connect jumpers used in the horizontal cabling cannot exceed | 10 meters |
| cabling that runs from a telecommunications outlet to a horizontal cross-connect. | horizontal cabling |
