| A | B |
|---|
| Parallel | When making tucks to control fullness in a garment Stitch _____ to folds. |
| staystitch | When making pleats to control fullness in a garment _______ across folds. |
| wrong sides | When making tucks place _________ of fabric together |
| Tucks | _______ are described as narrow folds of fabric that are stitched part-way or the entire length |
| disengage | When using the serger to create tucks ______ the upper knife so no fabric is cut off. |
| Box pleats | ______ are described as folds turned toward each other. |
| edgestitch | Linda wants to have a sharper edge to the pleats in her skirt. She should _______ along the outer or inner fold of the pleat. |
| Topstitching | Mary only wants pleats below the hip line in her skirt. _______ the pleats above the hip line will give a smooth hip line. |
| pin tucks | Larry wants to add _______ to the front of the shirt he is making. He should first tuck the fabric before cutting out the pattern. |
| uniform | A characteristic of well made tucks is that they are ______ in size. |
| pressed | A characteristic of well made pleat is that they are ______ in the direction indicated on pattern.. |
| inverted box pleat | An _________ is described as two pleats folded to meet each other |
| control fullness | The purpose of pleats and tucks in a garment is to ________. |
| wide folds | Marty stitches ______ ______ of fabric into the waist of his pants. These are called pleats. |
| knife pleats | Sue’s pattern illustrates the construction of thin pleats with folds turned in one direction. These pleats are called knife pleats. |
| set in sleeves | When stitching a __________ to the garment , the sleeve should be turned right sided out and the garment wrong side out. |
| ease | To _______ fullness in a set-in sleeve, gather between the notches on sleeve fabric. |
| kimono sleeve | This sleeve is cut in one piece with the front and Back of the garment |
| Closed sleeve | The set-in sleeve is sewn to the armhole before stitching the sleeve and garment seams in one continuous seam using the ________ ______method. |
| side seam | In the closed method of sleeve construction, ______ ____ is stitched before sleeve is attached. |
| Kimono | Joanne’s sleeve is attached to the garment with a seam that goes around the armhole at the tip of the shoulder. What type of sleeve is she constructing? |
| open | The ______ method of constructing a set-in sleeve is sewn to the armhole before stitching the sleeve and garment seams in one continuous seam |
