| A | B |
|---|
| debug ipx routing activity | Displays information about Routing Information Protocol (RIP) update packets |
| debug ipx sap | Displays information about Service Advertising Protocol (SAP) update packets. |
| encapsulation novell-ether | Specifies that Novell's unique frame format is used on a network segment |
| encapsulation sap | Specifies that Ethernet 802.2 frame format is used on a network segment. Cisco's keyword is sap |
| interface | Configures an interface type and enters interface configuration mode. |
| ipx delay | Sets the tick count. |
| ipx ipxwan | Enables the IPXWAN protocol on a serial interface |
| ipx maximum-paths | Sets the number of equal-cost paths the Cisco IOS software uses when forwarding packets. |
| ipx network | Enables Internetwork Packet Exchange (IPX) routing on a particular interface and optionally selects the type of encapsulation (framing). |
| ipx router | Specifies the routing protocol to use. |
| ipx routing | Enables IPX routing. |
| ipx sap-interval | Configures less frequent SAP updates over slow links. |
| ipx type-20-input-checks | Restricts the acceptance of IPX type 20 propagation packet broadcasts. |
| network | Assigns a NIC-based address to which the router is directly connected. Associates networks with an IGRP routing process. Enables Enhanced IGRP on a network in IPX router configuration mode. |
| ping | Sends ICMP echo request packets to another node on the network. Checks host reachability and network connectivity. Diagnoses basic network connectivity. |
| show ipx interface | Displays the status of the IPX interfaces configured in the Cisco IOS software and the parameters configured on each interface. |
| show ipx route | Displays the content of the IPX routing table. |
| show ipx servers | Displays the IPX server list. |
| show ipx traffic | Displays the number and type of packets. |
| show protocols | Displays the configured protocols. |
