| A | B |
|---|
| Stores Oxygen | Oxygen Cylinder |
| Stores Acetylene | Acetylene Cylinder |
| Regulates pressure of gasses | Pressure Regulator |
| Allowes gasses to leave the cylinder | Shut off valves |
| Holds the cylinders to ths cart | Chain |
| Tells how much pressure is in the tank | Tank pressure guage |
| Tells what the gas pressure to the hose is. | Working pressure guage. |
| Color associated with oxygen | Green |
| Color associated with acetylene | Red |
| Keeps blowback from entering the hose | Check Valve |
| Used with water to check for leaks. | Soap |
| Used to reinforce hoses | Nylon |
| Used on fittings to ensure a gas tight fit | Teflon Tape |
| Outermost part of an oxyacetylene flame | Envelope |
| middle portion of an oxyacetylene flame. | Feather |
| Small cone shaped portion of an oxyacetylene flame. | Cone |
| To ensure safety lines should be? | Bled out |
| Never used on regulators | Oil |
| Place where gasses are mixed | Mixing Chamber |
| Connects to mixing chamber for welding or brazing | Tip |
| Threads for flamable gas | Left hand |
| Threads for oxygen | Right hand |
| Pressure of a full oxygen tank. | 2200 psi |
| Pressure of a full acetylene tank | 250 psi |
| A welding tank is made of this | Armor Plate Steel |
| Tanks must be at least this thick | 1/4 inch |
| Heat of an nutral flame | 5600oF |
| Flame with too much oxygen | Oxidizing |
| Flame with too much Acetylene | Carborizing |
| Used to cut metal | Cutting tip |
| A mixture of copper and tin | Bronze |
| A mixture of copper and zinc | Brass |
| Coating on a brazing rod | Flux |
| Steel under 60,000 psi | Mild steel |
| Steel over 70,000 psi | High tensile steel |
| Mixed with acetylene for safety | Acetone |
| Mix for a nutural flame | 50/50 |
| Welding done with gas welder | Fusion |
