| A | B |
|---|
| Try not to keep sanding on the same spot on the sanding surface, | so you will not wear that spot out. |
| Only remove small | portions of material with the Belt / Disk Sander. |
| Taking off major amounts of material, | is not acceptable practice when using a Belt / Disk Sander. |
| Use a Dust Collector and Shop Vacs | to cut down on sanding dust. |
| Wearing Safety Glasses is mandatory | when using the Belt /Disk Sander. |
| Material should be held flat | against the rest. |
| Before using the Belt / Disk Sander | ask for permission. |
| Ask if you are not sure | how to operate a machine or tool. |
| If try to sand material on the up side of the Disk Sander, | it is possible for the material to be kicked into your face. |
| When sanding use | a small amount of pressure. |
| Turn the machine off before | making any adjustments to the machine. |
| Wearing work gloves can be more dangerous, | because you may loose dexterity. |
| Fingers should not be any closer than | 1" from the sanding surface. |
| The rest should be adjusted to | 1/8" from the sanding surface. |
