| A | B |
|---|
| Features NOT used in creating "Chisel" part | Extrude, Sweep and Revolve |
| The Loft feature must contain at least _____ profiles | Two |
| You have an offset plane. How do you change its Offset Distance | Double-click the plane to display its dimension. Double-clisk the dimension and enter a new value in the "Modify" box. Click "Rebuild". |
| When selecting a plane, such as a plane from the planes within the "Chisel" part, you know you have selected a plane when it turns _____ | Green |
| How to copy a new plane from an existing plane | Select existing plane; press "Ctrl" key, while clicking and dragging the existing plane |
| How to display shaded planes | Click "Tools"->"Options". On the "System Options tab", select "Display/Selection". Check "Display shaded planes" and click OK. |
| Sketch tools used to create the hammer head loft | Circle and Rectangles |
| If you sketch on the wrong plane, how can you change planes? | Right-click the sketch in the FeatureManager design tree or the graphics area, and select "Edit Sketch Plane". Select the new plane for the sketch, then click "OK" |
| In order to have a solid part with edges and shading showing, you must have the _____ button selected | Shaded with Edges |
| In order to bend the material as completed with the Hammer, you dragged the pointer over the _____ and dragged the pointer up and down to flex the material | Trim Plane |
