| A | B |
|---|
| built-in cabinet | attached or located within |
| job built cabinets | built on the job |
| custom | built at cabinet shops just for a particular job |
| manufactured- produced cabinets | built in factories that are in large numbers of the same cabinet |
| attached to each other | 6. If Mass-produced cabinets are used, cabinets have to be |
| full scale | carpenters draw a full-size sectional view of a cabinet |
| 34 1/2 to 36 inches HIGH | 9. Base cabinets in kitchens are normally |
| 24" DEEP | 10. A kitchen base cabinet is normally ____ deep because of drawer depth. |
| 1" | countertop of the base cabinet normally hangs over ____ inch from the face of the face. |
| 31 1/2 - 32" high | bathroom cabinet HEIGHT |
| face framed | type cabinet construction used in our cabinet project |
| frameless | style of construction that originated in Germany and is sometimes called European |
| sidemounts | types of drawer slide used on cabinet project in class |
| plumb | 16. When installing cabinets, a carpenter must check the walls to see if the walls are |
| fit | If walls are not plumb the carpenter must _____ the cabinets to the wall |
| trimable | make it easier to fit the cabinet to the wall |
| studs | 19. To attach the cabinets to the wall, the carpenter needs to know where the __________are located |
| lazy susan | 21. A cabinet unit that is mainly used in the corner of the kitchen to give full access to the total cabinet shelving |
| lip | general drawer type |
| overlay | general drawer type |
| 1/2" | 23. Stock for cabinet drawers are normally_____ inch thick |
| dovetail | 24. A drawer joint used in fine cabinetry and furniture |
| dado | 25. Shelves used in some cabinets are sometimes made so they fit into the sides and are glued to make them strong. A groove has to be cut into the side; this is called a _________ cut. |
| panel | styles of cabinet door fronts |
| solid | styles of cabinet door fronts |
| granite | type countertop material |
| marble | type countertop material |
| wood | type countertop material |
| laminated plastic | type countertop material |
| birch | panel stock for normally used for most cabinets around Pickens County. |
| 48 x 96 " | 31. Panel stock measures ______inches x _______inches |
| 3/8 and 1/2" | 32. Most panel stock used for cabinet sides and drawers is ___ & __ inch thick. |
| alder | type wood that matches Birch plywood and can be used for solid stock trim. |
